Air conditioners are essential for keeping our homes cool and comfortable during hot Utah summers, but have you ever wondered how they work? At Ogden HVAC, we specialize in maintaining, repairing, and installing air conditioning systems, and we’re here to explain the process in simple terms.

The Basics of Air Conditioning
An air conditioner doesn’t create cold air—it removes heat from your home and releases it outside. This process is made possible by a system of components working together to transfer heat, regulate airflow, and maintain a consistent indoor temperature.

Key Components of an Air Conditioner

1. Compressor
   • Located in the outdoor unit, the compressor is the heart of the air conditioner. It compresses refrigerant gas, increasing its pressure and temperature.
2. Condenser Coil
   • The condenser coil, also in the outdoor unit, releases the heat absorbed from inside your home. The refrigerant cools down and turns back into a liquid as it passes through the condenser.
3. Evaporator Coil
   • Found in the indoor unit, the evaporator coil absorbs heat from the air inside your home. The refrigerant evaporates into a gas as it absorbs heat, cooling the surrounding air.
4. Refrigerant
   • This chemical substance circulates between the indoor and outdoor units, transferring heat from your home to the outside.
5. Fan and Blower
   • The fan in the outdoor unit helps expel heat, while the blower in the indoor unit circulates cool air throughout your home.
6. Thermostat
   • Your thermostat controls the system, ensuring it maintains the desired temperature by cycling the air conditioner on and off as needed.

How the Cooling Process Works

1. Heat Absorption
   • Warm air from your home is pulled into the air conditioner and passes over the evaporator coil.
   • The refrigerant absorbs the heat, cooling the air.
2. Heat Transfer
   • The refrigerant, now a warm gas, flows to the compressor in the outdoor unit.
   • The compressor increases the pressure and temperature of the refrigerant.
3. Heat Release
   • The hot refrigerant gas moves through the condenser coil, where the heat is released to the outside air.
   • As the refrigerant cools, it returns to a liquid state.
4. Air Circulation
   • The blower sends the cooled air back into your home through ducts and vents.
   • The cycle repeats until your home reaches the desired temperature.

Why Regular Maintenance is ImportantYour air conditioner works hard to keep your home cool, and regular maintenance is crucial to keep it running efficiently. Here’s why:

• Improves Efficiency: Clean coils and filters allow the system to cool more effectively.
• Extends Lifespan: Preventive maintenance reduces wear and tear, helping your system last longer.
• Lowers Energy Bills: An efficient system uses less energy, saving you money.
• Prevents Breakdowns: Routine checks catch small issues before they become major problems.

Trust Ogden HVAC for Your Air Conditioning Needs

At Ogden HVAC, we’re experts in all things air conditioning. From maintenance to repairs and installations, we ensure your system operates at peak performance year-round.
 Call Us Today: 385-481-3226
Visit Us: 190 W 33rd Street #160 Suite D, Ogden, Utah 84401

Whether you need service for your current system or are looking for a new installation, we’re here to help. Would you like more energy-saving tips or information about upgrading to an energy-efficient system? Let us know!

Your thermostat is more than just a tool for controlling the temperature in your home—it’s also a powerful device for saving money on energy bills. By making strategic adjustments and using your thermostat efficiently, you can significantly reduce your heating and cooling costs. At Ogden HVAC, we’re here to share tips on how adjusting your thermostat can lead to big savings.

How Does Thermostat Adjustment Save Money?
​Heating and cooling account for nearly half of the average household's energy use. By lowering or raising your thermostat (depending on the season), you reduce the workload on your HVAC system, leading to less energy consumption and lower utility bills.

Thermostat Tips for Maximum Savings

1. Set it and Save
   • In the winter, set your thermostat to 68°F while you’re awake and lower it by 7–10 degrees at night or when you’re away.
   • In the summer, aim for 78°F while you’re home and increase it by a few degrees when you’re not.
2. Use a Programmable Thermostat
   • A programmable thermostat can automatically adjust temperatures based on your schedule, ensuring optimal energy use even when you forget.
   • For example, you can set it to lower the heat or AC when you’re at work and return to a comfortable setting just before you come home.
3. Go Smart with a Wi-Fi Thermostat
   • Smart thermostats learn your habits and preferences, allowing you to control your home’s temperature remotely via an app.
   • These devices provide energy usage reports, helping you identify patterns and areas for improvement.
4. Avoid Extreme Adjustments
   • Don’t set your thermostat drastically higher or lower than your target temperature to heat or cool your home faster. This practice won’t speed up the process but will make your HVAC system work harder and use more energy.
5. Utilize Zoned Heating and Cooling
   • If your home has multiple zones, adjust thermostats to heat or cool only the areas you’re using. This reduces energy waste.

Potential Savings from Thermostat Adjustments
According to the U.S. Department of Energy, adjusting your thermostat by 7–10°F for 8 hours a day can save you up to 10% per year on heating and cooling costs. For most households, this translates to hundreds of dollars annually.

Additional Tips for Energy Efficiency

1. Maintain Your HVAC System
   Regular maintenance keeps your system running efficiently, ensuring it responds accurately to thermostat settings.
2. Seal Leaks and Insulate
   Prevent heat or cool air from escaping by sealing ductwork and insulating your home properly.
3. Use Ceiling Fans
   Circulate air more effectively to maintain comfort at a lower thermostat setting.
4. Take Advantage of Sunlight
   Open curtains during winter days to let in heat and close them in the summer to block it.

Why Choose Ogden HVAC for Thermostat Installation and Maintenance?
At Ogden HVAC, we offer:

• Professional Thermostat Installation: Upgrade to a programmable or smart thermostat for maximum energy efficiency.
• HVAC Maintenance: Ensure your system operates efficiently and responds to thermostat adjustments.
• Expert Advice: Our team can help you find the best thermostat settings and solutions for your home.

Start Saving Money with Thermostat Adjustments Today!
Making simple changes to your thermostat settings can lead to significant energy savings. If you’re ready to upgrade to a smart thermostat or need help optimizing your HVAC system, Ogden HVAC is here to help.
Call Us Today: 385-481-3226
Visit Us: 190 W 33rd Street #160 Suite D, Ogden, Utah 84401

Signs Your Ductwork Needs Attention

1. Inconsistent Temperatures
   Are some rooms in your home too hot while others are too cold? Uneven airflow is often a sign of duct leaks, blockages, or poor design.
   
2. Higher Energy Bills
   If your energy costs are rising without a clear reason, your ducts may be leaking air, forcing your HVAC system to work harder.
   
3. Excessive Dust
   Is dust building up quickly in your home? Damaged or poorly sealed ducts can pull in dust and debris, reducing indoor air quality.
   
4. Strange Noises
   Whistling, rattling, or banging sounds from your vents might indicate loose connections, leaks, or improperly installed ductwork.
   
5. Weak Airflow
   If the air coming from your vents feels weak or insufficient, your ducts could be clogged or damaged.
   
6. Old Ductwork
   If your duct system is over 15 years old, it may be time for an inspection. Aging ducts are more prone to leaks, inefficiency, and poor performance.
   

Why Ductwork Problems Matter

• Reduced Comfort: Faulty ducts can lead to hot or cold spots, making it hard to maintain a comfortable indoor temperature.
• Higher Costs: Leaking or inefficient ductwork wastes energy, increasing your utility bills.
• Poor Air Quality: Dust, allergens, and pollutants can enter your ducts, affecting the air you breathe.
• Increased Wear on Your HVAC System: Your system has to work harder to compensate for duct issues, leading to more frequent repairs and a shorter lifespan.

What Can Be Done About Faulty Ductwork?

1. Duct Sealing
   
   • Repair leaks or gaps with professional-grade sealing to ensure your ducts deliver air efficiently.
   • This can reduce energy loss and improve system performance.
2. Duct Cleaning
   
   • Remove dust, debris, and allergens with thorough duct cleaning, improving airflow and indoor air quality.
3. Duct Insulation
   
   • Insulate ducts in unconditioned spaces (like attics or crawlspaces) to prevent temperature loss.
4. Duct Replacement
   
   • Replace damaged or outdated ductwork with modern, efficient materials designed to last.
5. Redesign or Upgrade
   
   • If your system was poorly designed, a professional upgrade can optimize airflow and improve overall comfort.

Why Choose Ogden HVAC for Ductwork Services?

• Experienced Professionals: Our team has the expertise to identify and fix ductwork issues efficiently.
• State-of-the-Art Tools: We use advanced equipment for sealing, cleaning, and repairs.
• Customized Solutions: Every home is unique, and we tailor our approach to meet your specific needs.
• Energy Savings: Our work helps improve efficiency, saving you money in the long run.
• Local Expertise: As Ogden-based professionals, we understand the unique HVAC needs of Utah homes.

Schedule Your Ductwork Inspection TodayIf you suspect your ductwork needs attention, don’t wait. At Ogden HVAC, we’re here to ensure your ducts are in top shape, helping you stay comfortable and save money year-round.
Call Us Today: 385-481-3226
Visit Us: 190 W 33rd Street #160 Suite D, Ogden, Utah 84401