When it comes to efficient, customizable home comfort, ductless mini-split systems have earned their spot as the go-to solution for Salt Lake City and Northern Utah homeowners. At Ogden HVAC, we’ve installed dozens of these units—so whether you’re tackling a hot attic, splitting zones between your living room and bedroom, or adding A/C to a new addition, here’s everything you need to know.

What Is a Ductless Mini-Split?
A ductless mini-split consists of two primary components:

1. Indoor Air Handler(s): Mounted high on a wall (or recessed in a ceiling), these units quietly blow conditioned air directly into your room.
2. Outdoor Condensing Unit: The “engine” that compresses refrigerant and expels heat outdoors.

Because there’s no ductwork, you bypass the inefficiencies and installation costs of traditional central HVAC. Each indoor unit connects via a small refrigerant line to the outdoor unit—hence “mini-split.”

5 Key Benefits

1. Zone Control
   Set different temperatures for each room. Turn the office off when you’re not working, and keep the nursery cozy at 72°F.
2. Energy Efficiency
   No duct losses (which can account for 20–30% of a system’s energy). Modern SEER ratings of 20+ slash utility bills.
3. Whisper-Quiet Operation
   Indoor handlers run at noise levels as low as 19 dB—so quiet, you’ll forget they’re on (until you feel that perfect breeze).
4. Small Footprint
   Indoor units are slim and unobtrusive; the outdoor condenser is about the size of a small suitcase.
5. Heating & Cooling
   Most mini-splits are heat pumps—so you get efficient heating in winter and cooling in summer, all in one package.

The Installation Process

1. Site Survey & Consultation
   We evaluate your space, desired zones, and structural considerations (wall strength, line‐set routing, electrical capacity).
2. System Design & Equipment Selection
   Choose the number of indoor units and the appropriate capacity (BTU ratings) per zone. We recommend slightly oversizing to account for Utah’s heat spikes.
3. Mounting the Indoor Units
   Create a 2–3″ hole through the wall for the refrigerant lines, condensate drain, and power. Install the mounting bracket and secure the air handler.
4. Placing the Outdoor Unit
   Position on a stable pad, away from heavy foot traffic, and clear of debris or deep snow. Connect refrigerant lines, electrical wiring, and condensate piping.
5. Vacuum, Charge & Test
   Evacuate the refrigerant lines to remove air and moisture, charge to spec, and run through test cycles. We verify temperatures, airflow, and check for leaks.
6. App & Remote Setup
   Most systems include a handheld remote—and many now offer Wi-Fi modules. We’ll connect your units to your home network for smartphone control and scheduling.
7. Client Walk-Through
   We show you how to adjust temperature, set weekly timers, and switch between heating/cooling modes—plus maintenance tips like filter cleaning.

What to Expect on Cost

• Single-Zone Systems: Typically range from $3,500–$5,500 all-in (equipment + labor).
• Multi-Zone Systems (2–4 heads): $6,500–$12,000 depending on head count and complexity.
• Factors Influencing Price:
  • Number of indoor units (zones)
  • Distance between indoor and outdoor units
  • Electrical upgrades (dedicated breakers, conduit)
  • Structural work (hard-to-reach installs or special mounting)

Even at premium upfront cost, many homeowners recoup their investment through energy savings and eliminated duct maintenance.

Maintenance & Longevity

• Clean Filters Monthly: Slide-out filters rinse under a faucet—let them dry completely before reinstalling.
• Annual Check-Up: We inspect refrigerant levels, test safety controls, and clean the outdoor coil.
• Protect the Outdoor Unit: Keep it clear of leaves, snow, and debris. A simple cover in winter prevents damage.
• Professional Tune-Ups: A yearly visit by Ogden HVAC keeps warranties valid and efficiency optimized.

With proper care, your mini-split can run for 15+ years.

Is a Mini-Split Right for You?

• Additions & Conversions: Perfect for garage-turn-game-room or basement-recap projects.
• Room-by-Room Comfort: Ideal when central air isn’t feasible—or when you want precise control.
• Eco-Friendly Upgrades: High-efficiency models qualify for local rebates and tax incentives.

If you’ve got a tricky spot, uneven home, or simply crave zoned comfort, a ductless mini-split is a smart choice.

Ready to Chill (and Heat) with Mini-Splits?
Ogden HVAC is Northern Utah’s go-to for ductless installations—from expert design to flawless execution. Contact us today for a free consultation at our showroom:

Ogden HVAC
190 W 33rd Street #160, Suite D, Ogden, UT 84401
 385-481-3226
Stay comfortable year-round—without the duct drama.




​

When Ogden summers crank up the heat, a reliable air conditioner isn’t just a luxury—it’s a necessity. At Ogden HVAC, we’ve been helping Northern Utah residents stay comfortable for years. Whether your AC is blowing lukewarm air, making odd noises, or simply refusing to turn on, our team at 190 W 33rd Street, Suite D, Ogden, UT 84401 is here to restore your cool—and keep it that way.

Signs You Need Professional AC Repair

1. Reduced Airflow
   If your vents feel more like gentle breezes than powerful blasts, your system may have a clogged filter, failing blower motor, or leaking ductwork.
2. Strange Noises
   Rattles, screeches, or hissing sounds? These can indicate loose components, worn bearings, or refrigerant leaks—issues you don’t want to ignore.
3. Unpleasant Odors
   Musty or chemical smells point to mold growth or refrigerant escaping. Both pose health risks and demand immediate attention.
4. Frequent Cycling
   If your AC is turning on and off rapidly (short-cycling), it wastes energy, strains components, and can leave your home unevenly cooled.
5. Spike in Energy Bills
   A sudden jump in your electric bill without increased usage often signals your AC is working harder to achieve the same comfort.

Why Timely Repairs Matter

• Save on Energy Costs
  A well-tuned system runs efficiently, using up to 30% less energy than one that’s struggling.
• Extend Equipment Lifespan
  Regular repairs and maintenance prevent the small issues that lead to expensive breakdowns or early replacements.
• Maintain Indoor Air Quality
  Clean, leak-free systems circulate healthier air, reducing dust, allergens, and mold spores in your home.
• Stay Comfortable All Season
  Nobody wants to swelter through a heatwave. Early fixes ensure consistent, reliable cooling when you need it most.

Our AC Repair Process

1. Comprehensive Diagnostic
   We start with a full system inspection—checking refrigerant levels, electrical connections, airflow, and more—to pinpoint the root cause.
2. Transparent Estimate
   You’ll receive a clear, no-surprise quote detailing parts, labor, and any recommended upgrades. We never upsell unnecessary services.
3. Skilled Repairs
   Our licensed technicians use OEM-quality parts and manufacturer-approved methods to restore peak performance.
4. Post-Repair Testing
   Before we leave, we run your system through its paces—verifying temperature differentials, airflow, and quiet operation.
5. Maintenance Tips
   We’ll show you simple steps to keep your AC in top shape between professional visits, from filter changes to thermostat programming.

Preventative Maintenance: Your Best Defense

An ounce of prevention is worth a pound of cure—especially when it comes to AC systems. We recommend:

• Biannual Tune-Ups
  Have Ogden HVAC inspect your unit in spring and fall to nip potential problems in the bud.
• Monthly Filter Checks
  Replace or clean filters every 30–90 days, depending on usage and filter type.
• Clear Debris
  Keep the outdoor unit free of leaves, grass clippings, and other obstructions.
• Smart Thermostat Use
  Programmable thermostats reduce unnecessary runtime and help balance comfort with efficiency.

Why Ogden HVAC?

• Locally Owned & Operated
  We’re right here in Ogden—no long wait times for service calls or parts shipments.
• Licensed & Insured Technicians
  Every repair is handled by professionals who adhere to strict safety and quality standards.
• Transparent Pricing
  Honest quotes, competitive rates, and no hidden fees—ever.
• Customer-First Approach
  We treat your home like it’s our own, arriving promptly, cleaning up after ourselves, and ensuring your satisfaction before we go.

Schedule Your AC Repair Today
​Don’t let a faulty air conditioner turn your home into a sauna. Reach out to Ogden HVAC—the local experts in AC repair and maintenance:
385-481-3226
190 W 33rd Street, Suite D, Ogden, UT 84401
www.ogdenhvac.com
Stay cool, comfortable, and worry-free all summer long with Ogden HVAC!

1. Check the Basics First
Before you panic or call a technician, check the essentials:

• Is the thermostat on the correct setting? Make sure it's set to “heat” or “cool,” depending on the season, and that the temperature is properly adjusted.
• Is the breaker tripped? A power issue is one of the most overlooked culprits in HVAC shutdowns.
• Did the filter get changed recently? A clogged filter can shut the system down or cause overheating/freezing.
• Are the vents open and unblocked? Closed vents can cause pressure imbalances and reduced airflow.

2. Know When to Replace vs. Repair
​If your HVAC system is more than 10–15 years old, it may be more cost-effective to replace it rather than continue paying for frequent repairs. Warning signs that your system may be beyond repair include:

• Rising energy bills despite routine use
• Constant short-cycling (starts and stops frequently)
• Uneven heating or cooling throughout the house
• Unusual noises—grinding, banging, squealing
• Frequent refrigerant leaks or motor failures

Our team provides honest assessments and will walk you through all your options.

3. Pay Attention to Warning Sounds
Strange sounds usually mean something is off:

• Buzzing or clicking: May indicate electrical issues
• Banging or rattling: Loose or broken parts
• Whistling: Airflow restriction or duct leaks
• Squealing: Worn-out belts or bearings

Don’t ignore it. The earlier we catch it, the less expensive the repair.

4. Don’t Skip Annual Maintenance
Annual tune-ups and inspections prevent 80% of breakdowns. During a maintenance visit, we clean coils, check refrigerant levels, test safety controls, inspect electrical components, and make sure your unit is operating at peak performance.
We recommend:

• Spring tune-up for air conditioners
• Fall tune-up for furnaces or heat pumps

5. Keep the Area Around Your Unit Clear
For outdoor AC units, make sure there’s at least 2 feet of clearance on all sides. Remove leaves, weeds, or debris that could obstruct airflow. For indoor units, avoid stacking storage or furniture too close to furnaces or air handlers.

6. Avoid DIY Repairs (For the Most Part)
Changing filters, cleaning around the unit, or resetting your thermostat? Totally fine. But when it comes to:

• Electrical components
• Refrigerant systems
• Combustion elements
• Control boards

It’s best to call a licensed HVAC technician. DIY repairs can be unsafe, void warranties, and often end up causing more damage.

7. Know Your Warranty Coverage
Many HVAC systems come with 10-year parts warranties—but only if they’ve been registered and properly maintained. Keep a record of service calls and routine maintenance in case warranty repair is ever needed.

8. Use a Trusted Local HVAC Company
When you're hiring for HVAC repair in Ogden, UT, be sure to choose:

• A licensed and insured contractor
• A team that handles both residential and light commercial systems
• A company familiar with Utah's seasonal demands and building codes
• Someone who gives clear pricing and offers repair and replacement options, not just upsells

At Ogden HVAC, we offer fast, honest, and affordable HVAC repairs throughout Weber and Davis Counties.

Common HVAC Repairs We Handle:

• AC not cooling
• Furnace not turning on
• Frozen evaporator coils
• Dirty flame sensors
• Clogged condensate drain lines
• Blower motor failure
• Heat pump troubleshooting
• Electrical and thermostat repairs
• Airflow issues and duct problems

Call Ogden HVAC Today
If your system is making noise, not working, or just not keeping you comfortable, don’t wait. Ogden HVAC is your trusted local expert for all things heating and cooling.
Call 385-481-3226, stop by 190 W 33rd Street #160 Suite D, Ogden, UT, or book service online at www.ogdenhvac.org

​1. Change Your Filter Regularly
This is the easiest (and most ignored) maintenance step. A dirty air filter restricts airflow, making your AC work harder than necessary. This can lead to higher energy bills and even damage the system.
Tip: Change your filter every 1–3 months depending on usage, pets, and allergies.

2. Keep Vents Open and Unblocked
​Closing vents in unused rooms won’t save money—it actually creates pressure imbalance and can damage your ductwork. Always keep vents open and make sure furniture or rugs aren’t blocking return air grilles.

3. Use a Programmable or Smart Thermostat
Set your thermostat to adjust automatically when you're away or asleep. A smart thermostat can learn your schedule and reduce cooling costs without sacrificing comfort.

4. Don’t Set the Thermostat Too Low
Setting your thermostat to 65°F won’t cool your home faster. In fact, it forces the system to run longer, which wastes energy and increases wear.
Recommended setting: 72–76°F during summer, depending on your comfort level.

5. Schedule Preventative Maintenance
An annual AC tune-up helps spot small issues before they turn into big repairs. At Ogden HVAC, we check refrigerant levels, clean coils, inspect components, and test overall performance.

6. Keep the Outdoor Unit Clean
Leaves, grass, and debris around your condenser unit can block airflow and reduce efficiency. Gently hose off dirt and keep plants trimmed back at least 2 feet.

7. Use Ceiling Fans
Fans don’t lower air temperature, but they improve air circulation, which can make your space feel cooler. Set ceiling fans to spin counterclockwise during summer.

8. Don’t Ignore Strange Noises or Odors
If your AC is making unusual sounds or smells musty, it's a sign that something’s wrong. Call a licensed technician before it leads to a breakdown—especially in peak season.

9. Upgrade an Old Thermostat
Old manual thermostats are less accurate and less efficient. A digital or Wi-Fi thermostat gives you better control and better performance, especially in extreme weather.

10. Consider a Zoning System
​If your home has hot spots or uneven cooling, a zoned HVAC system can regulate temperatures room by room. This is especially helpful for two-story homes or additions.

Bonus Tip: Don’t Skip the Warranty
Keep a record of service dates and proof of maintenance. Many manufacturer warranties require regular maintenance to stay valid.

Let Ogden HVAC Keep You Cool
Whether you need a quick tune-up, filter replacement, or a whole new AC system, Ogden HVAC is here to help you stay cool all summer long.
We proudly serve homeowners in:

• Ogden
• Roy
• Layton
• North Ogden
• South Ogden
• Pleasant View
• Riverdale
• Weber and Davis Counties

Call (385) 481-3226 to schedule your service, visit us at 190 W 33rd Street #160 Suite D, Ogden, UT, or book online at www.ogdenhvac.org

Why Bathroom and Shower Ventilation Matters
Bathrooms are naturally humid environments. Every hot shower, bath, or hand-wash sends moisture into the air. Without proper venting, that moisture stays trapped, leading to:

• Mold and mildew buildup
• Peeling paint and warped drywall
• Stained ceilings or bubbling texture
• Higher indoor humidity levels
• Poor indoor air quality and allergens
• Structural damage over time

A properly installed ventilation fan and duct system pulls moisture outside—protecting your home and helping your HVAC system maintain balanced airflow.

Signs You Need a New Vent Installed

• No current vent or fan in the bathroom or shower area
• Fan is noisy, weak, or doesn’t remove steam
• You see mold or water spots on walls or ceiling
• Bathroom feels stuffy or smells musty
• Your home was built before modern venting codes
• You’re remodeling and need updated airflow installed

We install vents for both existing bathrooms and new additions, including multi-fan systems for homes with multiple wet rooms.

Our Vent Installation Services Include:

• New bathroom exhaust fan installation
• Upgrading old or undersized fans to modern, quiet, energy-efficient models
• Proper ducting to the roof or sidewall (no attic dumping)
• Humidity-sensing fans for automatic moisture control
• Dedicated shower fan vents for large or enclosed wet areas
• Code-compliant ventilation for remodels and additions
• Kitchen range hood venting and other localized exhaust systems

We use trusted brands like Broan, Panasonic, and Fantech—and we ensure your vents meet both Utah building code and your home’s air balance needs.

Why Choose Ogden HVAC?

• Licensed and insured HVAC contractor
• Experience with both new homes and retrofits
• Fast installation with clean, professional finish
• Honest pricing and free consultations
• Full HVAC and ductwork services available
• Serving Weber and Davis Counties with integrity

We don’t just add vents—we improve your entire home airflow strategy.

Service Areas
Ogden HVAC installs bathroom and shower vents in:

• Ogden
• North Ogden
• Roy
• South Ogden
• Layton
• Pleasant View
• Farr West
• Riverdale
• Surrounding communities in Weber and Davis Counties

Upgrade Your Home's Airflow Today
If your bathroom has no fan—or an outdated one that can’t keep up--Ogden HVAC is here to help. We’ll assess your ventilation needs, recommend the right system, and install it correctly the first time.
Call 385-481-3226, visit our team at 190 W 33rd Street #160 Suite D, Ogden, UT, or schedule your quote online at www.ogdenhvac.org

What Happens When Air Filters Get Dirty?
Your HVAC filter traps dust, allergens, and airborne particles so they don’t circulate throughout your home. But over time, the filter becomes clogged—and that’s when problems start.
A dirty filter can lead to:

• Reduced airflow and weak temperature control
• Overworked HVAC equipment, leading to higher energy bills
• Poor indoor air quality, including increased allergens and dust
• System breakdowns or frozen coils in extreme cases

For most homes, filters should be replaced every 1 to 3 months, depending on the type of filter, usage, and whether you have pets, allergies, or high dust levels.

Why Clean Air Vents Matter Too
Even if you’re changing filters regularly, your air vents and return ducts can still collect dust, debris, pet hair, and even mold spores. Over time, this buildup can be redistributed every time the system turns on.
Signs your vents may need cleaning:

• You see visible dust blowing from vents
• There's a musty or dusty odor when the system runs
• You notice more dust collecting on furniture than usual
• Allergy symptoms worsen indoors
• You’ve recently remodeled or completed construction

Duct cleaning isn’t something you need every year, but periodic cleanings—especially after renovations or in older homes—can make a big difference in air quality and airflow.

Clean Filters + Vents = Lower Energy Bills
When airflow is restricted, your HVAC system works harder to deliver the same results. This adds stress to components, increases your power bill, and shortens the life of your equipment. Keeping your filters and vents clean can:

• Improve heating and cooling efficiency
• Extend the life of your HVAC system
• Reduce the need for costly repairs
• Make your home more comfortable year-round

Our Air Quality Services Include:

• HVAC filter replacement (including high-efficiency and allergen-grade options)
• Full system inspections for airflow and return blockages
• Air duct cleaning for supply and return vents
• Air quality assessments and recommendations
• Scheduled maintenance plans so you never forget a filter change again

Serving Homeowners Across Ogden and Northern Utah
We proudly serve residents in:

• Ogden
• North Ogden
• South Ogden
• Roy
• Pleasant View
• Layton
• Riverdale
• All surrounding areas in Weber and Davis Counties

Why Choose Ogden HVAC?

• Licensed, insured, and experienced team
• Residential and light commercial service
• Honest, clear explanations and no upselling
• Fast scheduling and routine maintenance available
• Experts in airflow, energy efficiency, and indoor air quality

Keep Your Air Clean and Your System Efficient
A clean HVAC system starts with clean filters and vents. Let us help you protect your home, your family, and your comfort year-round.
Call Ogden HVAC at 385-481-3226, visit our office at 190 W 33rd Street #160 Suite D, Ogden, UT, or request service online at www.ogdenhvac.org

How Do Heating and Cooling HVAC Systems Work Differently?
While your thermostat may look the same in summer and winter, the technology and energy use behind your system can change dramatically depending on whether you're using heat or air conditioning.
Heating ModeWhen you turn on the heat, your system uses one of the following to warm your home:

• Furnace (Gas or Electric): Heats air through combustion or electric resistance and distributes it via ductwork.
• Heat Pump: Reverses its refrigerant cycle to extract heat from the outside air—even in cold weather—and transfers it inside.
• Boiler (Less common in Utah): Uses hot water or steam to heat your home through radiators or in-floor systems.

Heating systems must work harder during Utah’s cold winters, and they rely heavily on proper airflow, sealed ductwork, and thermostat accuracy to function efficiently.
​
Cooling Mode
When you switch to cooling, your AC or heat pump extracts heat from the indoor air and transfers it outside using a refrigerant-based system.

• The indoor evaporator coil absorbs heat from your home’s air.
• The compressor pumps refrigerant to the outdoor condenser unit, where heat is released.
• The system also removes humidity for better comfort.

Cooling systems are especially sensitive to airflow restrictions, dirty coils, or refrigerant leaks. Regular maintenance helps avoid mid-summer breakdowns.

Top Heating and Cooling Questions We Hear from Ogden Homeowners
1. Why does my AC and furnace use the same fan?
Because most systems share a blower motor, your air handler or furnace helps move air whether you're heating or cooling. That’s why a failed fan can affect both modes.
2. Why is my upstairs hotter in summer and colder in winter?
Heat rises, and without proper airflow or zoning, temperature imbalance is common. We can improve this with duct adjustments, smart thermostats, or mini-split systems.
3. Should I run my fan on “auto” or “on”?
“Auto” is usually more efficient, running only when heating or cooling is needed. “On” circulates air continuously, which may help with airflow but uses more energy.
4. Why does my heat smell dusty?
​When heat kicks on for the first time each season, dust on the heat exchanger or burners can burn off. It’s common—but if the smell persists, a system inspection is smart.
5. What’s the difference between a heat pump and an AC?
An air conditioner only cools, while a heat pump can heat and cool by reversing the refrigerant cycle. Heat pumps are very efficient in Utah’s moderate winters.

Heating vs. Cooling Maintenance Needs
Both heating and cooling systems need seasonal care—but their service priorities differ.

• Heating Tune-Up: Inspect burners, heat exchanger, safety switches, gas pressure, and carbon monoxide levels.
• Cooling Tune-Up: Clean coils, check refrigerant pressure, flush drain lines, and inspect the outdoor condenser.

We recommend professional HVAC service twice per year—once in spring for cooling, and once in fall for heating—to prevent costly repairs and maximize efficiency.

Why Choose Ogden HVAC?

• Licensed and insured HVAC experts
• Experienced in both gas furnace and heat pump systems
• Fast, friendly service across Ogden and Weber County
• Maintenance plans available to protect both heating and cooling systems
• Local understanding of Utah’s climate and seasonal needs

Serving Homes and Businesses Across Northern Utah
Ogden HVAC proudly serves:

• Ogden
• North Ogden
• South Ogden
• Riverdale
• Roy
• Layton
• Pleasant View
• Weber and Davis Counties

Need Help with Heating or Cooling?
Whether you're preparing for winter, troubleshooting your AC, or just trying to understand your system better—Ogden HVAC is here to help.
Call 385-481-3226, visit us at 190 W 33rd Street #160 Suite D, Ogden, Utah 84401, or request service online at www.ogdenhvac.org

What Is Ductwork and Why Is It Important?
​
​Ductwork is the system of metal or flexible tubes that distributes conditioned air throughout your home. It's how warm or cool air travels from your HVAC system into each room. Properly designed, sealed, and insulated ducts are essential for:

• Consistent room temperatures
• Improved indoor air quality
• Energy efficiency
• System longevity

Even the best HVAC unit can underperform if the duct system is poorly installed or full of leaks.

Common Duct & Vent Issues We See in Ogden Homes

Here in Ogden, Utah, many homes—especially older ones—have ductwork that needs some TLC. Here are common problems we solve:

• Leaky ducts that let air escape
• Dust and debris buildup reducing airflow
• Improperly sized duct systems
• Blocked or closed vents
• Poorly placed return vents

Each of these can contribute to higher utility bills, hot/cold spots, and a stressed-out HVAC system.

Our Duct & Vent Services at Ogden HVAC

We offer a full range of ductwork and ventilation services, including:

• Duct inspections and airflow testing
• Duct cleaning and sealing
• Ductwork replacement or reconfiguration
• Vent relocation and new installations
• Zoned duct systems for multi-story homes

Our team uses advanced diagnostic tools to identify airflow issues and provide solutions that restore comfort and reduce energy waste.

When Should You Inspect Your Ducts?

We recommend having your ductwork inspected if:

• You've recently remodeled or added onto your home
• Your HVAC system seems less efficient
• You're experiencing excessive dust or allergies
• Some rooms never seem to reach the right temperature
• Your system is over 10 years old

Don't Ignore Your Ducts—They Could Be Costing You

Poor ductwork can reduce your HVAC system’s efficiency by up to 30%. That’s money blowing right out of your vents—literally. At Ogden HVAC, we help local homeowners get the most out of their heating and cooling systems with smart ductwork solutions that work.

Schedule Your Duct Inspection Today

If you’re in Ogden or surrounding areas, we’re ready to help. Let’s check your vents and ductwork to ensure your HVAC system is performing at its best.
Call us at (385) 481-3226 or

Complete Heating & Cooling Solutions for Riverdale Homes
Our team specializes in full-service HVAC care, including:

Furnace Repair & Replacement
Don’t let a cold night catch you off guard. We repair all furnace makes and models and install energy-efficient systems that save you money and keep your home cozy.

Air Conditioning Repair & Installation
Utah summers are no joke. If your AC is blowing warm air or not turning on, we’ll diagnose the issue fast and offer honest, affordable solutions.

HVAC System Installation & Upgrades
Whether you're building a new home or upgrading your current system, we design and install HVAC systems built for Utah’s climate and energy efficiency standards.

Seasonal Tune-Ups & Preventative Maintenance
Protect your investment and avoid surprise breakdowns with a professional tune-up before the season changes.

 Smart Thermostat Installation
Control your comfort and reduce your utility bills with a Wi-Fi-enabled thermostat. We install and configure smart systems like Nest, Ecobee, and Honeywell.

Why Riverdale Residents Choose Ogden HVAC
We know Weber County weather—and how to keep your home protected through it. Here’s what sets us apart:

• Fast service & flexible scheduling
• Transparent pricing with no pressure
• Expert technicians, licensed and insured
• Friendly, locally owned service
• Free estimates & financing available

We take pride in offering big results with small-town care—and we treat every home like our own.

Serving Riverdale and Surrounding Communities
We proudly provide HVAC services to Riverdale and nearby cities like:

• South Ogden
• Roy
• Ogden
• Clinton
• Washington Terrace
• West Haven
• Sunset

Wherever you are in Weber County, we’ll bring the tools, expertise, and trusted service you deserve.

 Get a Free HVAC Estimate in Riverdale, UT
Whether you need a fast repair, a full installation, or just peace of mind before the seasons change, trust Ogden HVAC to take care of it.
190 W 33rd Street #160 Suite D, Ogden, Utah 84401
Call now: (385) 481-3226
www.OgdenHVAC.org

When your home’s comfort is on the line, you need an HVAC company you can count on. At Ogden HVAC, we proudly serve North Ogden, UT with professional, affordable, and reliable heating and air conditioning services for every season.
Whether it’s the chill of winter or the peak of summer, our licensed HVAC technicians are here to ensure your home stays efficient, safe, and comfortable—all year long.

HVAC Services We Offer in North Ogden, Utah
We provide comprehensive HVAC solutions for homes and businesses throughout Weber County, including:

• Furnace Repair & Installation Is your furnace making strange noises or not keeping up? We offer fast, affordable furnace repairs in North Ogden, plus expert installation of energy-efficient systems when it's time for a replacement.
• Air Conditioning Repair & Maintenance - Beat the Utah heat with prompt AC repairs and annual tune-ups. We work on all makes and models and help improve your system’s performance and energy use.
• HVAC Installation for New Builds & Remodels - Building a new home or renovating in North Ogden? We’ll design and install a custom HVAC system that fits your space, usage, and budget.
• Smart Thermostat Installation - Upgrade your thermostat for better energy control and long-term savings. We install all major smart brands like Nest, Ecobee, and Honeywell.
• Ductwork & Ventilation - From duct repair to custom ventilation solutions, we make sure your airflow is clean, balanced, and efficient.

Why North Ogden Homeowners Choose Ogden HVAC
We’re not just another contractor—we’re your neighbors. With years of experience serving North Ogden and surrounding communities, we’ve built a reputation for:

• Transparent pricing and honest recommendations
• Fast, same-day service in many cases
• Local, licensed, and insured technicians
• Residential and light commercial HVAC expertise
• Financing options available for new systems

Our customers appreciate our local knowledge, especially when it comes to Utah’s fluctuating climate and unique energy challenges.

Do You Need HVAC Help in North Ogden?
If you’re noticing any of these issues, it might be time to call Ogden HVAC:

• Inconsistent heating or cooling between rooms
• Your system runs constantly but doesn’t keep up
• Spikes in your energy bill
• Strange smells or sounds from your vents
• Thermostat not responding or inaccurate

We provide free estimates and honest assessments. No upselling—just real solutions.

Brands We Work With
We service and install systems from trusted names like:

• Carrier
• Trane
• Lennox
• Rheem
• Goodman
• Amana
• Mitsubishi (Mini-Split Systems)

Get a Free HVAC Estimate in North Ogden, UT
Whether it’s time for an AC upgrade, emergency furnace repair, or just a second opinion—you can trust Ogden HVAC to handle it right.
190 W 33rd Street #160 Suite D, Ogden, Utah 84401
Call now: (385) 481-3226
www.OgdenHVAC.org